BED TYPE MILLING MACHINING CENTRE FS(Q) 80/100/125
Pallet design
Bed-type milling machine FS together with Bed-type machining centre FSQ are intended for machining of heavy, sizeable and difficult shaped workpieces (for example moulds and dies).
The machine can be adapted for particular workpieces according to customer´s requirements. That means to work out technology of machining, time schedule for all operations and specification of tool execution.
Machine description
The machine consists of a fixed bed which carries a table that moves on it. A fixed column is fitted with vertical guideways for the traverse of a bracket that carries a cross travelling ram-type spindle head. A chain-type tool magazine "R" with an automatic tool changer is fixed to the column side.
Worktables are available in three table versions: longitudinal table (A), pallet positioning table (D) and pallet positioning rotary table continuously controlled (E). A linear pallet changer (I) forms part of the machine in pallet version, it enables clamping of a new workpiece on the pallet outside the working area of the machine.
Machines are a unit-build conception which enables considerable variability of configuration. Configuration possibilities can be clearly seen in the FS, FSQ configuration diagram.
Spindle heads
|
Spindle head – type „O“In a vertical or horizontal position the head can swivel around the cross axis from +177,5° to -180° by 2,5°. Swiveling around cross axis and H/V positioning comes from a regulatory servodrive of the spindle. |
 |
Spindle head – type „S“is a single spindle head, continuously controlled in two axes. Around croos axis of the machine, the head can swivel in the extent of ±90° and around the axis perpendicular to the cross axis of the machine in the extent of +15° to -195° . The head is suitable for machining of complex-shaped workpieces. |
|
 |
Spindle head – type „K“is a single spindle head center -kept, controlled in two axes. The head can swivel around cross axis in the extent of ±90°. In axis perpendicular to the cross axis the head can be titled in the extent from +30° to -180°. |
|
 |
Shift out quill „W“Horizontal headstock with a shift out quill "W"In this execution it is possible to order aditional spindle heads IPS and IUS as optional accessories. The heads can be automatically clamped to the front area of the headstock. The heads are placed into the holder on the machine table during the interchange. |
Specification
| Spindle head type |
|
O | S | K | W |
|---|---|---|---|---|---|
| Spindle taper according to ČSN 22 0433 standard |
|
ISO 50 | |||
| Spindle speed range | min−1 | 2 500/4000/5000 | 3500/5000 | 3500 | 3200 |
| Maximal torque | Nm | 1 200/750/630 | 900/630 | 900 | 1200 |
| Usable output of main drive | kW | 22 | |||
| Swiveling speed around cross axis | °.min−1 | 1 600 | 1800/5400 | - | |
|
|
|
FS(Q)80 | FS(Q)100 | FS(Q)125 |
|---|---|---|---|---|
| Stroke longitudinal A2
A3 A4 A5 D, E |
mm
|
2 000
3 000 4 000 5 000 1 600 |
||
| cross A2/A3/A4/A5 [mm]
D, E |
mm
|
1 000/ 1 250
1 000/1 250 |
||
| vertical A2/A3/A4/A5 (O,S,W)
(K) D, E (O,S,W) (K) |
mm
|
1 400/1 600/ 2000
1 500/1 600/2 000 750/1 250 850/1 350 |
||
| Working feeds range [mm/min] | mm/min
|
1 – 5 000 | ||
| Rapid traverse cross and vertical direction
longitudinal direction A2 A3 A4 A5 D, E |
m/min
|
10
15 12 10 8 15 |
||
| Max. thrust in linear axes | N
|
25 000 | ||
| Machine weight without magazine (informative) | t
|
21/22/25/27 | 22/24/26/29 | 22/24/26/30 |
| Total machine input | kVA
|
50 | ||
|
|
D | E | |
|---|---|---|---|
| Table width | mm
|
1 000 | |
| Table length | mm
|
1 000/1 250 | |
| Table height from the base | mm
|
1 050 | |
| Rotating speed of pallet table | °.min−1 | 1 440 | 1 – 1 440 |
| Max torque of pallet table | Nm | - | 5 000 |
| Table load | kg/m² | 6 000 | 6 000 |
| Number of tools in a magazine |
|
40 | 60 |
| Maximal diameter of tools placed side by side | mm
|
130 | |
| Maximal diameter of tools placed across | mm
|
250 | |
| Maximal tool lengtt | mm
|
340 | |
| Maximal tool weight | kg
|
25 | |