Bed type milling machine (Machining Centre) FS(Q) G
MACHINE DESCRIPTION
The main technical feature of Bed type milling machine (Machining Centre) FS(Q) G is fixed bed with moving table together with traversing spindle headstock in vertical and cross direction.
This machine is designed for chip-machining of materials with a wide range of technological use in operations such as milling, drilling, roughing out, reaming, and threading including thread cutting by chaser.
In the basic execution this machine is delivered with control system HEIDENHAIN - iTNC 530 and digital drives HEIDENHAIN. The machine FS(Q) G is equipped with a drum tools magazine.
MAIN TECHNICAL INFORMATION
| Table clamping surface A2 | ||
| width | mm | 800 |
| length | mm | 2 000 |
| Table working height | mm | 500 |
| Max. table load | kg/m2 | 3 000 |
| Working stroke | ||
| longitudinal X | mm | 2 000 |
| cross Y | mm | 900 |
| vertical Z | mm | 800 |
| Programmed Feed Rates in the X, Y, Z axes | mm.min-1 | 5 - 20 000 |
| Spindle speed range | min-1 | 20 - 4 000 |
| Control system- digital |
|
HEIDENHAIN - iTNC 530 |
| Drives - digital |
|
HEIDENHAIN |
| Main motor usable output | kW | 19,3 |
| Total input required | kVA | 30 |
| Machine dimensions without magazine | ||
| length | mm | 5 244 |
| width | mm | 4 480 |
| height | mm | 2 211 |
| Machine weight | kg | 8 500 |
| Max. number of beds |
|
20 |
| Max. tool diameter at full magazine | mm | 120 |
| Max. tool length/weight | mm / kg | 300 / 20 |
Powered by m@gnetpro